Critical review for the quantification of leachate production: Evaluation example for the “Oum Azza” public landfill in Rabat city,Morocco

The estimation of leachate quantities produced in landfills is necessary to dimension the treatment plants allowing to reduce the polluting load of these effluents and consequently avoid their negative impacts on the environment. Different leachate quantification methods were used in this study to assess the leachate volume produced at the Oum Azza landfill. The water balance method give comparable estimations of leachate production to the Ouled Berjal landfill ratio. The first method showed average values between 487 and 495 m³/day for 2015, 2018, and 2019, and at the same time, the second method gave values between 470 and 477 m³/day for the same years. In contrast, the World Bank ratio showed high values that vary between 2260 and 2295 m³/day for 2015, 2018, and 2019. The on-site data and the statistical analysis showed us that the World Bank ratio is not adapted for the estimation of the leachates produced in Oum Azza landfill, while the water balance and the ratio of Ouled Berjal landfill allowed to give comparable results to reality.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

城市污泥-磷石膏陶粒的制备条件及性能分析

以城市污水处理厂剩余污泥和磷酸生产废渣磷石膏为原料制备多孔陶粒,考察不同配比、烧结温度及烧结时间对多孔陶粒堆积密度、吸水率及盐酸可溶率的影响。结果表明:在污泥与磷石膏混合比1∶4、烧结温度1 050℃、烧结时间15 min的条件下,可制得堆积密度为685.78 kg/m~3、吸水率27.34%、盐酸可溶率11.38%的陶粒,该陶粒内部含有丰富的膨胀气孔,可用作水处理滤料或建材骨料。     

An experimental study on the burning rate of a continuously released n-heptane spill fire on an open water surface

Spill fires are common during oil product storage and transportation after a loss of containment. Since the burning fuel is moving and the fuel depth is quite shallow, the burning rate in a spill fire is different from that of a pool fire with a static burning zone. Unlike pool fires, which have been studied for decades and have well-established correlations for burning rate, research on spill fires is inadequate. In this paper, continuously released n-heptane spill fire experiments were conducted on open water surfaces with varying fuel discharge rates. The pool diameters were measured, and the spill fire burning rates were estimated based on a dynamic balance between fuel supply and combustion. The burning rates in n-heptane pool fires from the literature were reviewed and compared with the estimated burning rates in spill fires of the same dimension. The spill fire burning rate was found to be close to that in a pool fire during the initial burning phase but lower than that in a bulk burning pool fire and that in a “fuel-level-controlled” pool fire. The distinction between the burning rates of spill fires and pool fires is explained by the heat balance analysis of the fuel layer. A model for the spill fire burning rate was proposed accordingly. The results calculated with the presented model are closer to the measured data than those calculated with pool fire models.     

分离岛式地铁站可用安全疏散时间计算与比较分析*

为研究大客流地铁车站风险因素，提出车站疏散能力分析的基本要素，结合某分离岛式地下车站，采用规范计算及精细网格模型对可用安全疏散时间进行计算与比较分析。结果表明:楼扶梯的通过效率、车站结构形式、疏散人员的数量及分布情况等因素对仿真模拟的结果产生影响；《地铁安全疏散规范》（GB/T 33668—2017）综合考虑了疏散至楼扶梯入口时间、楼扶梯上平均滞留时间及通道非均匀性偏差时间等，与仿真模拟结果的吻合度较高。研究结果可为国内类似车站的安全疏散设计及运营疏散组织提供参考。     

Time perspective balance and team adaptation in dynamic task contexts

The concept of time perspective balance has attracted increased attention from scholars in the past decade, reflected in published evidence suggesting positive outcomes ranging from enhanced mood to life satisfaction for those individuals possessing balance among their past, present, and future time perspectives, and assumedly able to shift their time perspective to match situational demands. In this paper, we consider the notion of time perspective balance in an organizational setting within which much consequential adaptation often occurs—the team environment—and explore different configurations of time perspective balance in teams facing dynamic task contexts. Drawing from work on situational awareness, we first consider the mechanism by which time perspective balance likely influences individual adaptation in dynamic task-focused situations. Next, we postulate what types of team configurations—ones with more balanced time perspective uniformity or ones with more time perspective variety—might be more appropriate in dynamic contexts given key team conditions. We illustrate our analysis with examples from healthcare team settings and offer ideas for future research.     

“T”型地铁换乘站多点火灾工况下综合火灾危险性研究

为探究大型地铁站多线路火灾场景中的综合危险性，采用火灾动力学软件FDS构建“T”型换乘站全尺寸模型，对不同火源位置、不同火源功率以及是否开启地铁排烟风机等12组工况进行数值模拟；采用性能化方法确定可用疏散时间，并通过综合火灾风险评估方法计算各工况总安全指数。结果表明:1号线站厅层和2号线站台层双点火灾为最不利火灾场景；1号线站台层和2号线站厅层双点火灾为相对安全火灾场景；火源功率的增大会增加地铁火灾危险性，但不同火源位置工况中的安全指数变化趋势相似；排烟模式开启前，1号线站厅层火灾会导致较大的火灾危险性；排烟模式开启后，地铁总安全指数显著上升且安全指数变化趋势改变，此时2号线站台层火灾会导致较大的火灾危险性。     

基于ACF-AMDF的气井环空液面回波特征提取方法

为了精确有效地提取声波法检测气井环空液位的回波周期，在分析环空中测试波的传播特征及基音周期检测的基础上，提出1种基于检测信号短时自相关函数(ACF)及平均幅度差函数(AMDF)的液面回波周期提取方法；利用自主搭建的室内模拟实验系统开展了不同初始环空压力下环空液位检测实验；对检测信号进行中心削波处理并计算ACF/AMDF，提取出液面回波周期并与理论计算值对比分析；同时分析了现场环空液位检测信号，提取其回波周期。研究结果表明:提出的新方法能有效地用于提取环空液面回波周期；室内实验中，该方法最大误差绝对值为1.54%；该方法能够有效抑制液面回波信号中的随机噪声及接箍反射波等，处理后的信号曲线在回波周期处峰值更加突出、集中，而在其他位置更加平滑，提高了对液面回波周期特征的辨识能力。     

振荡辐射下PMMA 热解与着火过程研究

采用正弦波变化振荡的辐射热流,对热厚PMMA(聚甲基丙烯酸甲酯)的热解和着火过程进行研究,同时采用数值模拟,对实验结果进行验证和补充。结果表明,表面温度和深度温度随着时间而增加,温度由于周期性的辐射而发生振荡,而振荡幅度随着深度的增加而衰减;表面温度与深度温度振荡存在时间延迟;着火时间随着热流振荡周期的增大而减小,主要由于平均热流密度随着周期增大而增大。     

德国铁路噪声实时监测系统研究现状

分析了德国铁路噪声在线监测的应用背景，介绍了德国铁路噪声实时监测系统的研究现状，包括测量站点的选取原则、技术结构和具体信息，列车声压级曲线时域连续变化图、单次列车通过声压级曲线图、单次列车通过参数表和等效声压级曲线图/表等测量结果的表达方法，以及无效数据的处理方式等，为我国建立铁路噪声自动监测系统提供参考。